In-Situ CO2 Mineralization Case Study: Optimizing Well Design and Injection Strategy in the Greenhills Ultramafic Deposits, New Zealand
Paper posted in SPE Journal, Volume 30, Issue 10, October 2025.
A Collaborative Study on DFIT Interpretation: Integrating Modeling, Field Data, and Analytical Techniques
Paper presented at the SPE/AAPG/SEG Unconventional Resources Technology Conference, Denver, Colorado, USA, July 2019.
A Utica Case Study: The Impact of Permeability Estimates on History Matching, Fracture Length, and Well Spacing
Paper presented at the SPE Annual Technical Conference and Exhibition, Calgary, Alberta, Canada, September 2019.
Estimating Reservoir Permeability and Fracture Surface Area Using the Flowback DFIT (“DFIT-FBA”)
Journal Paper posted in the November 2022 SPE Reservoir Evaluation & Engineering, Volumt 25, Issue 04.
Best Practices in DFIT Interpretation: Comparative Analysis of 62 DFITs from Nine Different Shale Plays
Paper presented at the SPE International Hydraulic Fracturing Technology Conference & Exhibition, Muscat, Oman, January 2022.
Advances in the Interpretation of Diagnostic Fracture Injection Tests
Chapter 7 – Advances in Interpretation of Diagnostic Fracture Injection Tests, available online 25 February 2022, Version of Record 25 February 2022.
Estimating Stress from Fracture Injection Tests: Comparing Pressure Transient Interpretations with In-Situ Strain Measurements
PROCEEDINGS, 47th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 7-9, 2022
SGP-TR-223
Estimating Reservoir Permeability and Fracture Surface Area Using the Flowback DFIT (DFIT-FBA)
Journal paper published in SPE Res Eval & Eng 25 (04): 704–718.
Using in-situ strain measurements to evaluate the accuracy of stress estimation procedures from fracture injection/shut-in tests
Received 31 January 2023, Revised 3 May 2023, Accepted 2 July 2023, Available online 17 July 2023, Version of Record 17 July 2023.